You are here: Home » News » EIESD: What to Include in an Ionizing Air Bar RFQ

EIESD: What to Include in an Ionizing Air Bar RFQ

Views: 0     Author: Site Editor     Publish Time: 2026-11-17      Origin: Site

Inquire

facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
kakao sharing button
snapchat sharing button
telegram sharing button
sharethis sharing button

2.4.png

A request for quotation can determine whether an ionizing air bar project starts with a suitable technical proposal or a collection of prices that cannot be meaningfully compared. A request stating only the required bar length and quantity leaves suppliers to make assumptions about material speed, installation distance, incoming charge, compressed air, and performance expectations.

For manufacturers working with films, labels, adhesive tapes, plastic sheets, electronic assemblies, and other static sensitive processes, those assumptions matter. An apparently economical quotation may exclude the power supply, require more air than expected, or offer performance demonstrated under conditions that differ from the actual machine.

An ionizing air bar RFQ should include the application, materials, production speed, treatment width, available installation space, required performance, utility conditions, control interfaces, environmental requirements, acceptance procedure, supply scope, and commercial terms. Ask suppliers to state assumptions, identify deviations, and provide evidence supporting their proposed configuration.

A complete RFQ does not require the buyer to design the ionizer. It gives suppliers enough information to recommend suitable equipment while establishing a common basis for technical and commercial comparison. The following sections explain what to specify and provide a reusable checklist.

Describe the Application and Static Control Objective

Explain what the production line does, where static develops, and what improvement the ionizing air bar must deliver. A clear process description helps suppliers select equipment for the actual problem.

Start with a short description of the operation. Examples include neutralizing film after unwinding, controlling charge during release liner removal, reducing sheet cling before feeding, or treating material before inspection. Identify the machine stage where the equipment will operate.

Describe the observed problem using production evidence where available. Dust attraction, irregular stacking, material adhesion, operator complaints, and electrostatic discharge concerns are different symptoms. They may require different treatment positions and evaluation methods.

Separate neutralization from mechanical cleaning. If the application requires loose particles to be removed, specify that requirement independently. An ionizer can reduce electrostatic attraction, but dislodging and collecting particles may require suitable airflow and extraction.

Identify the Critical Downstream Operation

State where controlled static is required. Material can be successfully neutralized and then become charged again during subsequent roller contact, separation, or transfer. A supplier needs this information to recommend the treatment location.

Include a process sketch or photographs where useful. Mark the proposed mounting area, material direction, charging events, and the operation affected by static. This often communicates more than a long description of the symptoms.

Specify Materials and Production Conditions

List the materials, dimensions, speed range, and operating variations the equipment must handle. Avoid describing a variable production process with only one nominal operating point.

Identify material composition, thickness, surface treatment, coatings, and relevant layers. A plain plastic film, an adhesive coated web, and a metallized laminate may behave differently. If material details are confidential, provide enough functional information to support a technical recommendation.

State minimum, normal, and maximum production speeds. Higher speed reduces treatment exposure and increases the surface area requiring neutralization each second. Also identify intermittent movement, indexing, acceleration, and frequent stops where relevant.

Describe normal variation in material width, tension, lateral position, and path stability. A system selected for a narrow stable web may not cover a wider product or tolerate a changing gap caused by flutter.

Report Existing Static Measurements Carefully

If measurements are available, include the instrument, sensor distance, measurement location, polarity, and surrounding geometry. A voltage value without its measurement conditions provides limited information.

When the incoming charge is unknown, state that clearly. Ask whether the supplier recommends a preliminary survey or material trial rather than inventing a numerical requirement that does not represent the process.

Define Treatment Width and Installation Constraints

Specify the required active coverage and available mounting envelope separately. Overall housing length, active ionizing length, and material width are different dimensions.

Provide the maximum treatment width and expected lateral movement. Ask the supplier to confirm usable coverage under the proposed installation conditions, including edge treatment. Do not assume that a housing matching the web width provides adequate active coverage.

State the available working distance from the active face to the material. Where this distance changes during operation, provide its range. Identify nearby grounded rollers, frames, guards, backing plates, and extraction ducts.

Describe mechanical restrictions such as mounting hole positions, cable exit direction, bracket access, vibration, and maintenance clearance. Include the permissible equipment envelope so the proposal can be checked before purchase.

Allow Suppliers to Explain Alternative Arrangements

If the mounting location is flexible, say so. A modest change in position may improve performance or reduce compressed air demand. Ask suppliers to explain why they recommend a particular location.

If both surfaces require treatment, identify the access available on each side. Increasing output from one side should not be assumed to solve every charge distribution on an insulating material.

Request Measurable Performance and Supporting Test Data

Request positive and negative charge decay results, offset voltage data, and application evidence under stated conditions. Performance claims should identify how, where, and under which settings they were measured.

Charge decay time describes how quickly a defined charged test object is neutralized between specified voltage endpoints. Offset voltage describes the potential developed by a test plate in the ionized environment. These are complementary characteristics.

Ask for both initial polarities rather than a single favorable decay figure. Require the report to identify working distance, airflow, electrical settings, test locations, instruments, and relevant environmental conditions.

Where a recognized test method is required, identify the method and edition in the RFQ. For example, IEC 61340-4-7:2025 addresses ionizer evaluation through offset voltage and charge decay measurements under specified conditions. Request the supporting report rather than treating a general reference to the method as sufficient evidence.

Distinguish Standard Test Data from Production Guarantees

A laboratory test plate does not reproduce every moving material condition. Ask suppliers to explain the relationship between their published data and the proposed application, especially where speed, gap, or incoming charge is demanding.

If numerical process limits have not yet been established, request a trial proposal and a method for agreeing acceptance criteria. This is more useful than asking for an undefined guarantee of complete static removal.

Specify Compressed Air and Electrical Supply Conditions

Provide the available air and electrical supplies, then request consumption and compatibility at the proposed operating settings. Utility requirements should be part of the quoted configuration.

For compressed air assisted equipment, state the available pressure near the installation and any known variation during production. Describe existing filtration, drying, and connection arrangements. Ask the supplier to specify required air quality rather than assuming the current supply is adequate.

Request airflow at the recommended pressure and configuration. Pressure alone does not establish consumption. For reference volume flow, require the stated reference conditions so quotations can be compared consistently.

For electrical supply, provide available voltage, frequency where applicable, connection type, and panel space. Ask whether the proposal includes an external power unit, controller, cables, connectors, and required protective components.

Request Operating and Idle Consumption

Utility item

Buyer information

Supplier response requested

Compressed air pressure

Available range during operation

Recommended setting and permitted range

Air quality

Existing treatment arrangement

Required filtration and moisture conditions

Air consumption

Expected operating hours and duty cycle

Flow at validated settings and reference conditions

Electrical supply

Available supply and connection

Compatibility, demand, and included power equipment

If utility reduction is an objective, invite a separately priced alternative using airless or fan driven ionization where suitable. Require equivalent application evidence before comparing the alternative on operating cost.

Define Machine Controls and Monitoring Requirements

Specify how the ionizer should interact with the machine, including enable commands, status signals, alarms, and any required monitoring or communication functions.

Describe the operating sequence. The system may run continuously with the web, activate for individual parts, or stop during idle periods. Ask the supplier to confirm the permitted sequence for ion generation and airflow.

Identify the available control interfaces and required electrical characteristics. State whether the machine needs discrete signals, analog values, or a particular communication interface. Request connection diagrams and clarify who supplies the integration work.

Define the intended meaning of each status signal. A power present indication is different from evidence of adequate neutralization. Ask what the equipment actually monitors and which conditions can remain undetected.

Specify Monitoring Only Where It Supports a Decision

If residual static monitoring is required, identify sensor locations, measurement range, data needs, and expected response. Closed loop control may require additional sensors, software, or commissioning work that should appear in the quotation.

For ordinary equipment alarms, state the expected machine response. Where a safety related function is required, identify it separately so it receives the appropriate engineering treatment rather than being inferred from a standard fault output.

Describe Environmental and Documentation Requirements

Tell suppliers about temperature, humidity, contamination, cleaning, and any special installation conditions. Request documentation that applies to the exact proposed equipment and configuration.

Describe dust, oil mist, adhesive contamination, solvent exposure, washdown, and cleaning chemicals where relevant. These conditions influence housing materials, emitter access, maintenance frequency, and enclosure suitability.

For cleanliness sensitive production, identify the actual process requirements. Ask for evidence relevant to particle generation, material compatibility, cleaning, and installation. A general cleanroom suitability statement does not define performance in every controlled environment.

If the location has a formally classified hazardous environment, provide the classification and project requirements. Suitability must be established for that specific setting and complete installation. Do not assume that ordinary static control equipment is appropriate merely because its purpose is to reduce charge.

Request Evidence with a Clear Scope

List required manuals, drawings, declarations, test reports, and destination market documents. Ask suppliers to identify what each document covers, including the equipment model, accessories, and relevant limitations.

Where ozone, noise, or electromagnetic compatibility evidence is required, specify the measurement context or request the supplier's documented test conditions. A numerical claim without distance, operating settings, or method may be difficult to interpret.

Clarify Supply Scope, Maintenance, and Support

Require an itemized supply list and a clear statement of exclusions. Include the components and services needed to turn the quoted bar into an operational installation.

Identify whether the quotation must include the power unit, controller, mounting brackets, cables, air fittings, regulators, valves, sensors, and software. Specify cable lengths where known because short standard cables may be unsuitable for the machine.

Ask for recommended maintenance procedures, cleaning materials, inspection intervals, and replaceable parts. Maintenance frequency should be described as application dependent where appropriate rather than presented as an unconditional interval.

Request information about spare parts availability, replacement lead times, technical support, and repair arrangements. These details can influence downtime more than a small difference in purchase price.

Define Installation and Commissioning Responsibilities

Clarify who performs mechanical mounting, electrical integration, pneumatic installation, parameter setup, and performance testing. If commissioning is offered remotely, identify what preparation and local support are required.

Include training and document language requirements. Operators should understand status indications and cleaning needs, while maintenance personnel need enough information to restore the validated arrangement after service.

Include an Acceptance Test and Deviation Procedure

State how the equipment will be accepted and require suppliers to identify exceptions before ordering. A written procedure reduces disagreement about whether the delivered system meets the requirement.

Define the respective roles of factory testing and installed testing. Factory tests can verify equipment condition and controlled performance, while installed tests confirm behavior with the actual machine, material, and utility supplies.

Include representative materials, speeds, widths, measurement positions, and quality indicators. Define the required instruments and how results will be assessed. Where limits remain provisional, establish the process for agreeing them before final approval.

Request a deviation register. Each supplier should mark requirements as met, partly met, not met, or requiring clarification, with an explanation. Silence should not be treated as confirmation of every detail.

Plan for Unsuccessful Trials

Agree how failed results will be investigated and retested. A change in mounting position or equipment configuration may affect other test conditions, so the retest scope should reflect the modification.

State how acceptance affects the commercial process, using the buyer's agreed purchasing terms. Clear technical milestones help prevent a delivery event from being confused with proof of successful production performance.

Request Comparable Pricing and Delivery Terms

Ask for itemized pricing, delivery assumptions, quotation validity, warranty scope, and optional costs. Compare complete installed solutions rather than isolated bar prices.

Provide the required quantity and distinguish initial purchase from possible future demand. Request separate prices for equipment, mandatory accessories, recommended spares, commissioning, training, and optional monitoring.

Ask suppliers to state currency, payment terms, delivery basis, destination assumptions, packaging, and excluded charges. If a recognized delivery rule is used, specify the named place and applicable edition so the basis is unambiguous.

Request lead time from a defined starting event, such as order confirmation and approval of drawings. Clarify whether custom lengths, connectors, documentation, or tests extend the schedule.

Compare Operating Costs on a Common Basis

Estimate utility cost using the consumption required to meet acceptance criteria. A low purchase price may be offset by greater compressed air demand, additional accessories, or frequent service.

Review warranty coverage, exclusions, service location, and responsibility for transport or field labor. Compare what support is actually included rather than ranking quotations only by the stated warranty duration.

Use a Structured Ionizing Air Bar RFQ Checklist

Organize the RFQ into a common response schedule so every supplier answers the same technical and commercial questions. Use explicit entries for unknown items and proposed alternatives.

The checklist below provides a practical starting structure. Replace general descriptions with project specific values and attach supporting drawings where needed. Keep mandatory requirements separate from preferences so suppliers understand where alternatives are acceptable.

Assign a requirement identifier to important items if the project is complex. This makes clarifications and deviations easier to track without repeatedly revising the entire document.

Before issuing the RFQ, ask production, maintenance, automation, quality, and purchasing personnel to review the sections relevant to them. Their input can reveal missing requirements before quotations arrive.

RFQ category

Information to include

Response required

Application

Process stage, static problem, critical downstream operation

Recommended treatment approach and location

Materials

Composition, thickness, coatings, width range

Suitability and material related limitations

Production

Speed range, movement pattern, tension variation

Supported operating range and evidence

Installation

Available gap, mounting envelope, nearby structures

Drawing, clearances, active coverage

Performance

Decay, offset, and process measurement requirements

Documented results and test conditions

Utilities

Air and electrical supplies, operating hours

Required quality, consumption, connections

Controls

Enable sequence, interfaces, status and monitoring needs

Signal definitions and integration scope

Environment

Temperature, humidity, contamination, cleaning conditions

Suitability and supporting documentation

Supply scope

Accessories, installation, commissioning, training

Itemized inclusions and exclusions

Acceptance

Trial conditions, criteria, report requirements

Agreement, qualifications, and deviations

Commercial terms

Quantity, delivery destination, required schedule

Itemized price, lead time, validity, warranty

Suggested Supplier Response Instruction

Please respond to each requirement, identify all assumptions and deviations, and provide an itemized quotation for a complete operational system. Present optional alternatives separately and explain their effect on performance, installation, utilities, maintenance, and acceptance testing.

Compare Quotations Against the Complete Requirement

A useful ionizing air bar RFQ makes performance, installation, operating cost, and supply scope explicit. The best quotation is the one that credibly meets the complete application requirement.

Begin with the material and process, then provide enough detail for suppliers to recommend an appropriate configuration. Request performance evidence under relevant conditions and make installation constraints visible from the start.

Use a common response format to compare equipment, utilities, accessories, support, and commercial terms. Resolve assumptions and deviations before ordering so important gaps do not emerge during commissioning.

Finally, connect the purchase to an agreed acceptance procedure. A clear RFQ gives both buyer and supplier a practical basis for delivering equipment that performs reliably on the intended production line.

Table of Content list
Decent Static Eliminator: The Silent Partner in Your Quest for Efficiency!

Quick Links

About Us

Support

Contact Us

  Telephone: +86-188-1858-1515
  Phone: +86-769-8100-2944
  WhatsApp: +8613549287819
  Email: Sense@decent-inc.com
  Address: No. 06, Xinxing Mid-road, Liujia, Hengli, Dongguan, Guangdong
Copyright © 2025 GD Decent Industry Co., Ltd. All Rights Reserved.