DCB-30BXG ion stainless steel bar is a special fixed static elimination device, a type of induction bar static eliminator. It generates powerful ion airflow to neutralize static electricity and remove foreign particles and dust on object surfaces. It is an industrial product designed for initial static dust removal of flat materials, especially suitable for winding and unwinding equipment processing films, fabrics, paper, etc. It features simple installation, stable operation, strong plasma output and fast static elimination speed.
The DCB-30BXG ion stainless steel bar generates a large volume of airflow carrying positive and negative ions via induction ejection to neutralize static charges on workpiece surfaces.
If the workpiece surface carries negative static charges, it attracts positive ions in the airflow;
If the workpiece surface carries positive static charges, it attracts negative ions in the airflow. Static electricity on the surface is fully neutralized to achieve static elimination.
Rapid static neutralization
Wide coverage of ion airflow
Equipped with reliable grounding protection for the air bar
Customizable length to meet customer requirements
Hermetically sealed electronic components
Stainless steel construction with robust structure and long service life
One ion generator can drive up to 4 bars simultaneously
Separated interface design for easier installation, safer operation and extended service life
Item | Specification |
|---|---|
Operating Voltage | 4.0 KV |
Input Voltage | 220 V |
Current Consumption | 0.4 μA |
Operating Range | 100 ~ 4000 mm |
High-voltage Cable Length | 2500 mm |
Dimension | Φ32 × 80 ~ 4000 mm (customizable length) |
Relative Operating Humidity | ≤60% RH |
Materials | Stainless steel, tungsten steel needles, PVC |
Air Pipe Connector Size | Φ8 |
Recommended Working Distance | 300 mm |
This product is used for initial static dust removal of flat materials, widely adopted in electronics, film processing, textile, printing, plastic, packaging, medical device, pharmaceutical, cleanroom and other industries.
Static electricity is mostly generated by friction. After static elimination with this product, secondary friction of the workpiece should be avoided.
Test Conditions: Operating voltage: 4.0 kV | Test voltage range: 2.0 kV ~ 100 V Ambient temperature: 20 ℃ | Test instrument: ME268A Static Tester
Distance | 100 mm | 150 mm | 300 mm |
|---|---|---|---|
Neutralization Time (Positive Charge) | 0.4 s | 0.7 s | 1.0 s |
Neutralization Time (Negative Charge) | 0.5 s | 0.7 s | 1.1 s |
Residual Voltage (Positive Charge) | +20 V | +24 V | +25 V |
Residual Voltage (Negative Charge) | -20 V | -25 V | -22 V |
Notes:
All test data above are measured by ME268A static tester.
Test results may vary depending on test environment, air condition, temperature and humidity.
